چکیده
هدف از این تحقیق تجربی, مطالعه رفتار بتن با استفاده از عیارهای مختلف خاکستر بادی است. در این بررسی, مواد تشکیل دهنده معمول مانند سیمان، سنگدانه ریز، درشت دانه، آب و مواد افزودنی معدنی مانند خاکستر بادی در سطوح مختلف جایگزینی ساخته شدند. نسبت چسبندگی آب, (W / B) 45 در نظر گرفته شده است. بتن مورد استفاده در این تحقیق, متناسب با اهداف مختلف با استحکام متوسط 20MPa, 25MPa, 30MPa در نظر گرفته شد. نمونه هایی مانند مکعب قالب بندی شدند و برای مخلوط های مختلف با 0٪، 12.5٪، 25٪، و 37.5 درصد جایگزینی مختلف خاکستر بادی به منظور مطالعه خواص مکانیکی مانند مقاومت فشاری در سنین مختلف بتن مانند 7 ، 28، و 90 روز آزمایش شدند. طراحی مخلوط مطابق با 10262-1982 IS در نظر گرفته شده است.
مقدمه
بتن به عنوان ترکیبی ناهمگون از سیمان، آب و دانه, به خوبی شناخته شده است. مواد افزودنی را می توان به منظور افزایش برخی از خواص ویژه مورد نظر به بتن اضافه نمود. به طور گسترده مشخص شده است که متناسب و مخلوط کردن اجزاء تشکیل دهنده بتن مانند سیمان، شن و ماسه, درشت دانه ها و تراکم (فشردگی) گام های مهمی در فرآیند ساخت بتن می باشند. اقدامات کنترل کیفیت برای کنترل کیفیت بتن تولید شده انتظار می روند. اینها عبارتند از آزمایشات بر روی بتن خیس مانند آزمون های قابلیت کارکرد و آزمون ها بر روی بتن سخت شده.
Abstract
The purpose of this experimental investigation is to study the behavior of Concrete using Various fineness Fly ash. In this investigation was manufactured by usual ingredients such as cement, fine aggregate, coarse aggregate, water and mineral admixtures such as Fly ash at various replacement levels. The water binder ratio (w/b) adopted is 0.45. The concrete used in this investigation was proportioned to various target a mean strength of 20MPa, 25MPa, 30MPa. Specimens such as cubes, were cast and tested for various mixes are cast with 0%, 12.5%, 25%, and 37.5% replacement of various fineness Fly ash to study the mechanical properties such as compressive strength at different ages of concrete such as 7, 28, and 90 days. The mix Design as per IS 10262-1982.
Introduction
Concrete as is well known is a heterogeneous mix of cement, water and aggregates. The admixtures may be added in concrete in order to enhance some of the properties desired specially. It is widely recognized that proportioning and mixing of the constituents of concrete such as cement, sand and coarse aggregates and compaction are important steps in concrete making process. Quality control measures are expected to keep a check on the quality of concrete being produced. These include tests on wet concrete such as workability tests and tests on hardened concrete.
چکیده
مقدمه
مواد و روش ها
روش آموزن
نتایج و بحث
نتیجه گیری ها
خلاصه
Abstract
Introduction
Materials and Methods
Testing Methodology
RESULTS AND DISCUSSION
CONCLUSIONS
SUMMARY