رنگدانه آبی مصری میکرونیزه: پودر گرد و غبار اثر انگشت نزدیک به مادون قرمز
ترجمه نشده

رنگدانه آبی مصری میکرونیزه: پودر گرد و غبار اثر انگشت نزدیک به مادون قرمز

عنوان فارسی مقاله: رنگدانه آبی مصری میکرونیزه: پودر گرد و غبار اثر انگشت نزدیک به مادون قرمز
عنوان انگلیسی مقاله: Micronised Egyptian blue pigment: A novel near-infrared luminescent fingerprint dusting powder
مجله/کنفرانس: Dyes and Pigments
رشته های تحصیلی مرتبط: مهندسی مواد، فیزیک
گرایش های تحصیلی مرتبط: فیزیک کاربردی، مهندسی اپتیک و لیزر
کلمات کلیدی فارسی: اثر انگشت های پنهان، رنگدانه آبی مصری، نورافشانی NIR
کلمات کلیدی انگلیسی: Latent fingerprints, Egyptian blue pigment, NIR luminescence
نوع نگارش مقاله: مقاله پژوهشی (Research Article)
شناسه دیجیتال (DOI): https://doi.org/10.1016/j.dyepig.2016.05.008
دانشگاه: Nanochemistry Research Institute, Curtin University, GPO Box U1987, Perth, Western Australia, 6845, Australia
صفحات مقاله انگلیسی: 6
ناشر: الزویر - Elsevier
نوع ارائه مقاله: ژورنال
نوع مقاله: ISI
سال انتشار مقاله: 2016
ایمپکت فاکتور: 3.753 در سال 2017
شاخص H_index: 103 در سال 2019
شاخص SJR: 0.819 در سال 2017
شناسه ISSN: 0143-7208
شاخص Quartile (چارک): Q1 در سال 2017
فرمت مقاله انگلیسی: PDF
وضعیت ترجمه: ترجمه نشده است
قیمت مقاله انگلیسی: رایگان
آیا این مقاله بیس است: خیر
کد محصول: E11781
فهرست مطالب (انگلیسی)

Abstract
Graphical abstract
Keywords
1- Introduction
2- Materials and methods
3- Results and discussion
4- Conclusions
Acknowledgements
Appendix A. Supplementary data
References

بخشی از مقاله (انگلیسی)

Abstract

In this paper we demonstrate that micronised Egyptian blue pigment can be used as a safe and simple material to visualise latent fingerprints on non-porous surfaces as near-infrared luminescent impressions. This allows the detection of latent fingerprints on highly patterned and reflective surfaces that have proven challenging with existing techniques.

Introduction

The detection of latent fingerprints is extremely useful in forensic investigations to establish evidence of contact between the criminal, the victim, and/or the crime scene [1-3]. To that end, a wide range of chemical and physical methods have been developed to aid in their detection and recovery, the choice of which is dependent on the nature of the surface involved [1,2]. The most common approach to detecting latent fingerprints on non-porous items has been the use of dusting powders, which work through physical adhesion to the latent fingerprint deposit [1-5]. It has been estimated that in the United Kingdom, approximately 50% of the 60,000 fingerprint identifications per annum arise from powdered fingerprints [1]. Historically, a wide range of materials have been utilised as fingerprint powders; including carbon black, iron oxide-based magnetic powder and titanium dioxide; in attempts to achieve improved visualisation across a wide variety of surfaces and conditions [1-5]. In recent times, this has included attempts to use natural products such as turmeric as safe and inexpensive powders [6]. Several commercially available powders exhibit luminescence in the visible region of the electromagnetic spectrum, which to some extent can negate the interferences exhibited by highly patterned or coloured surfaces [1,2,4]. However, there remain many fluorescent, highly patterned and/or reflective surfaces that continue to prove troublesome [7-9].