دانلود مقاله نمایش دیجیتالی بافت ها در زیست الکترومغناطیس
ترجمه نشده

دانلود مقاله نمایش دیجیتالی بافت ها در زیست الکترومغناطیس

عنوان فارسی مقاله: نمایش دیجیتالی بافت ها در زیست الکترومغناطیس با پردازش بالا
عنوان انگلیسی مقاله: Digital representation of tissues in high compute bioelectromagnetics
مجله/کنفرانس: Journal of Computational and Applied Mathematics - مجله ریاضیات محاسباتی و کاربردی
رشته های تحصیلی مرتبط: مهندسی پزشکی
گرایش های تحصیلی مرتبط: بیوالکتریک
کلمات کلیدی فارسی: مدلسازی بافت، زیست الکترومغناطیس، متغیر بودن مدل
کلمات کلیدی انگلیسی: Tissue modelling, Bioelectromagnetics, Model variability
نوع نگارش مقاله: مقاله پژوهشی (Research Article)
شناسه دیجیتال (DOI): https://doi.org/10.1016/j.cam.2021.113643
نویسندگان: Artur Krupa - Izabella Antoniuk
دانشگاه: Warsaw University of Life Sciences, Poland
صفحات مقاله انگلیسی: 13
ناشر: الزویر - Elsevier
نوع ارائه مقاله: ژورنال
نوع مقاله: ISI
سال انتشار مقاله: 2021
ایمپکت فاکتور: 2.867 در سال 2020
شاخص H_index: 127 در سال 2021
شاخص SJR: 0.875 در سال 2020
شناسه ISSN: 0377-0427
شاخص Quartile (چارک): Q2 در سال 2020
فرمت مقاله انگلیسی: PDF
وضعیت ترجمه: ترجمه نشده است
قیمت مقاله انگلیسی: رایگان
آیا این مقاله بیس است: خیر
آیا این مقاله مدل مفهومی دارد: ندارد
آیا این مقاله پرسشنامه دارد: ندارد
آیا این مقاله متغیر دارد: ندارد
آیا این مقاله فرضیه دارد: ندارد
کد محصول: E16219
رفرنس: دارای رفرنس در داخل متن و انتهای مقاله
نوع رفرنس دهی: vancouver
فهرست مطالب (ترجمه)

چکیده

1. مقدمه

2. تعریف مدل

3. ایجاد مدل

4. فرآیند شبیه سازی

5. نتیجه گیری

منابع

فهرست مطالب (انگلیسی)

Abstract

1. Introduction

2. Model definition

3. Model creation

4. Simulation process

5. Conclusions

Acknowledgements

References

بخشی از مقاله (ترجمه ماشینی)

چکیده

     نشان دادن هر نوع بافت زنده به شکل دیجیتال به دلیل ساختار ناهمگن آن و همچنین مسائل مختلفی که در طول چنین انتقالی با آن مواجه می‌شود، یک مشکل پیچیده و سخت است. معمولاً برای اطمینان از زمان‌های محاسباتی سریع‌تر، مدل‌ها ساده‌ سازی می‌شوند، یعنی با میانگین‌ گیری پارامترهای موجود. چنین رویکردی می تواند منجر به حذف ویژگی های اساسی و در نتیجه کاهش دقت نتایج به دست آمده شود. در شبیه سازی، الکترومغناطیس زیستی از رویکرد متفاوتی برای محاسبات عددی استفاده می کند. علاوه بر این، از مدل ها برای نمایش پدیده هایی که توصیف می کنند استفاده می شود. این مقاله رویکردی به بازنمایی بافت در زمینه شبیه‌سازی و تحقیقات الکترومغناطیسی زیستی ارائه می‌کند که نتیجه کار انجام شده توسط نویسندگان در این زمینه در سال‌های اخیر است. توصیف مدل به طور گسترده در مقاله مورد بحث قرار گرفته است، با در نظر گرفتن مشکل عدم قطعیت عددی، قابلیت اطمینان، میانگین‌ گیری یا هندسه اتخاذ شده. هر مفهوم در مثال ها همراه با سطح احتمالی به حداقل رساندن تأثیر بر نتایج شبیه سازی ارائه شده است. این کار همچنین شامل یک مدل نمونه با توصیف پارامتری بافت ها و تأثیر این مشکلات بر نتایج واقعی است. ما تحلیلی ارائه می‌کنیم که نشان می‌دهد کدام پارامترها برای مدل‌سازی بافت ضروری هستند، چگونه پیچیدگی یک مدل بر شبیه‌سازی تأثیر می‌گذارد و چگونه استفاده از مدل‌های بافت مختلف می‌تواند بر رابطه بین زمان شبیه‌سازی کل و اثربخشی خروجی تأثیر بگذارد. فرآیند شبیه سازی بر اساس یک محیط محاسبات ابری در مقیاس بزرگ با راه حل های طراحی، شبیه سازی و بهینه سازی ارائه شده، یکی از بسیاری از راه حل های موجود است. در حال حاضر، روش‌ های توصیف‌ شده در این مقاله به طور استاندارد در حل‌کننده‌ها یا شبیه‌سازی‌های پرکاربرد گنجانده نشده‌اند. نتایج ارائه شده می تواند منجر به یکسان سازی و استاندارد سازی روش های مدل سازی بافت فعلی، بهبود استاندارد های محاسباتی کلی در تحقیق در مورد تأثیر میدان الکترومغناطیسی بر موجودات زنده شود.

توجه! این متن ترجمه ماشینی بوده و توسط مترجمین ای ترجمه، ترجمه نشده است.

بخشی از مقاله (انگلیسی)

Abstract

     Representing any type of living tissue in digital form is a complex and demanding problem due to its heterogeneous structure as well as different issues that can be encountered during such transition. Usually, to ensure faster computation times, models are simplified, i.e. by averaging available parameters. Such an approach can result in omitting essential features and, consequently, lead to lower accuracy of obtained results.

     In simulations, bioelectromagnetism uses a different approach to numerical calculations. Additionally, models are used to represent the phenomena they describe. This article presents an approach to tissue representation in the field of bioelectromagnetic simulations and research, which is the result of work carried out by the authors in this field in recent years.

     The description of the model is widely discussed in the paper, taking into account the problem of numerical uncertainty, reliability, averaging or the adopted geometry. Each concept is presented in the examples, along with the possible level of minimization of the impact on the simulation results. The work also includes an exemplary model with a parametric description of tissues and the impact of these problems on the actual results. We present an analysis showing which parameters are essential for tissue modelling, how the complexity of a model influences a simulation and how using different tissue models can impact the relation between total simulation time and output effectiveness. The simulation process was based on a large-scale cloud computing environment with the presented design, simulation and optimization solution, one of the many available.

Introduction

     The problem of human tissue representation in digital form, used for simulations in mathematics, mechanics or electrical engineering, has been discussed in the scientific literature since the first half of the 20th century. At the same time, modelling problems with the use of computing machines at that time did not appear until the 1960s. In the beginning, the central theme of the described research was the transfer of the biological state to a mathematical notation that would allow the definition of individual organs, unified tissues or even entire objects constituting a simulation model of the human body. Thanks to an increasingly detailed understanding of anatomy as well as more complex mathematical functions and technological development, the quality of the simulations, models and their digital representation have improved significantly.

     One of the first similarly described works, when it comes to the subject of tissue modelling, is [1]. In this case, the numerical model for the capillary–tissue system was defined, which is responsible for oxygen transportation in cerebral grey matter. The presented definition assumes significant simplifications in overall representation instead of focusing on defining the problem in a controlled way and propose, above all, an understanding of the functioning of the biological oxygen transport system. Another example, which uses the mathematical model, uses the finite element method to visualize the mesh describing human aortic valve leaflets [2]. A completely different yet also numerical approach is described in [3]. The authors present the reconstruction of the mathematical model of the human chest on the basis of the potential from the electrodes using the inverse solution.

Conclusions

     In the course of the research conducted in recent years (the results of which have been presented here), methodologies for the modelling of biological objects (tissues) in bioelectromagnetic problems have been developed. The problem of computer imaging of tissues is highly complex, and it is not possible to accurately reproduce them on a micro-scale. Treatment of tissues ‘‘molecularly’’ is almost impossible or involves much computational effort.

     Determining the relationship between such a precisely mapped model mesh, taking into account the concept of the variability, the existing environment, building a mathematical model or uncertainty, is currently beyond the computational capabilities of even supercomputers. Additionally, the issue of detail and scale of the problem should be considered for each such application.

     It is the given fact that increasing accuracy of the model will result in similar relations in the obtained results, which may include previously unaccounted cases and threats, e.g. for humans — whether in therapy or in an electronic device that a human will have to deal with. At the same time, it will result in increasing computation time and problems with preparing actually executable scenarios.